Dear Students,
The college reopens after summer vacation on Monday.
Classwork will begin at 10:00AM.
Best wishes...
HoD-ECE-SVIT
Saturday, June 29, 2013
Sunday, June 9, 2013
T2P Workshop Batch 03 Registrations
Dear Student,
I will be conducting a week long workshop (THIRD BATCH) for 2011 Batch from 17th to 22nd of JUNE.
1. The number of students is LIMITED to 20.
2. Entry is on first come first served basis.
3. LAST DATE FOR REGISTRATION IS 14-06-2013 before 9:00 PM
4. To register, mail me hodece@live.com with your details as soon as possible.
5. There is NO ADMISSION FEE for the workshop.
6. Cost of material must be borne by the students only.
7. If you are interested in participating, you must strictly follow the rules and regulations laid out for the period.
8. It is NOT COMPULSORY TO ATTEND THE WORKSHOP.
All details will be provided once the final list is prepared.
Please note:
You risk elimination from the workshop if you do not follow the rules strictly.
Rules and contents are likely to be fine-tuned based on the suggestions from the previous workshops.
I will communicate through email with only those students who have registered for the workshop.
Best
HoD-ECE-SVIT
Monday, June 3, 2013
Batch 02 T2P Workshop begins today
Dear Students,
The second batch T2P workshop started at 08:30AM today.
Students who attended the first workshop are requested to be in touch with me to know when they should come for the remaining inputs.
Best
HoD-ECE-SVIT
The second batch T2P workshop started at 08:30AM today.
Students who attended the first workshop are requested to be in touch with me to know when they should come for the remaining inputs.
Best
HoD-ECE-SVIT
Sunday, June 2, 2013
T2P Workshop Batch 02
Dear Students
The workshop will begin at 08:30 AM tomorrow in the Computer Lab of ECE Dept on 4th Floor.
Be there on time for registration and introduction.
Other details will be explained in person.
Best
HoD-ECE-SVIT
The workshop will begin at 08:30 AM tomorrow in the Computer Lab of ECE Dept on 4th Floor.
Be there on time for registration and introduction.
Other details will be explained in person.
Best
HoD-ECE-SVIT
Friday, May 31, 2013
Batch 02 : T2P Workshop 03-08 June
All students who have registered for the second workshop must :
Check out the traffic/transport issues in their route and PLAN AHEAD so that they can be in the college at 08:30AM sharp. This is the MOST IMPORTANT CONDITION for participating in the workshop.
HoD-ECE-SVIT
Wednesday, May 29, 2013
T2P Workshop Batch 02 - Registrations CLOSED.
Dear
Student,
The REGISTRATIONS for the T2P
Workshop from 03-08th May, 2013 are now CLOSED.
Students registered in the first batch but dropped out due to personal reasons may send a mail to me if they wish to join the second batch.
Students registered in the first batch but dropped out due to personal reasons may send a mail to me if they wish to join the second batch.
Following is the list of students :
11P71A0401
|
BOYINA
ABHILASH
|
11P71A0421
|
GANAPATHI
KUVALESH YERLAGADDA
|
11P71A0473
|
ANNADANAM
RUTWIK PRABHAT
|
11P71A0474
|
GANAPA
SAI BINDU
|
11P71A0475
|
M SAI
SANTOSH KUMAR
|
11P71A04A2
|
M SUHA REDDY
|
11P71A04A3
|
G
SUSHMITHA
|
11P71A04A4
|
VELAGALA
VANDANA
|
11P71A04B1
|
ZAHERA
FATIMA
|
11P71A04B3
|
A R S
SASHANK *
|
*Pending confirmation from the student.
Thank you for the response and
inclination to do a project in the ECE department during your vacation
period.On 01st June, 2013 I will send you a mail based on which you
will be coming to the department.
The workshop will be from 03rd June
2013 to 08th June 2013.
You will have to abide by the rules
and regulations that will be put in place exclusively for the project work.
The component costs and tool costs will have to be borne or shared
exclusively by you.You will be given guidance and help which will be sufficient
to execute the projects. You will have supervisors who will monitor your
work and take care of your needs.
Your aptitude and attitude towards a disciplined design approach will be
monitored closely.
A certificate will be given to you at
the end only on successful completion of all projects.
Attendance to all classes is
compulsory.
Please wait for the detailed schedule
before coming to college.
If you wish to drop out, due to
personal engagements, this is the time.
Good Wishes and thanks for your
interest in Electronic Design.
For further details on a day to day
basis please visit http://11ecesvit.blogspot.in
HoD-ECE-SVIT
Friday, May 24, 2013
T2P Workshop Batch -2 - reg
Dear Student,
I will be conducting a week long workshop (SECOND BATCH) for 2011 Batch from 03rd to 08th of JUNE.
1. The number of students is LIMITED to 20.
2. Entry is on first come first served basis.
3. LAST DATE FOR REGISTRATION IS 29-05-2013 before 9:00 PM
4. To register, mail me hodece@live.com with your details as soon as possible.
5. There is NO ADMISSION FEE for the workshop.
6. Cost of material must be borne by the students only.
7. If you are interested in participating, you must strictly follow the rules and regulations laid out for the period.
All details will be provided once the final list is prepared.
Please note:
You risk elimination from the workshop if you do not follow the rules strictly.
I will communicate through email with only those students who have registered for the workshop.
Best
HoD-ECE-SVIT
Thursday, May 23, 2013
T2P Workshop : Day 02 Schedule
Dear Students
DAY TWO ACTIVITIES
08:30AM - 09:30AM : Activity - 07
09:30AM - 09:45AM : BREAK
09:45AM - 10:00AM : Video
10:00AM - 10:30AM : Quiz-01
10:30AM - 12:30PM : Project-01
12:30PM - 01:30PM : LUNCH
01:30PM - 02:30PM : Activity - 08
02:30PM - 03:30PM : Project - 02
03:30PM - 04:00PM : Video
04:00PM - 04:20PM : Presentations and Review.
04:20PM - 04:30PM : Day 03 Introduction and Instructions
Good Wishes
HoD-ECE-SVIT
+91-9866358271
T2P Workshop : Day 01
Dear ALL,
Today at 08:30AM the workshop started with 5/10 registered turning up.
It was extremely hot and I really congratulate the students who are sitting through the sessions.
Day 01 was mostly theoretical preparatory exercises and practicals will be more from Day 02.
If more students had turned up, the variety of discussions and opinions would have spiced up the atmosphere.
However, the current batch of 5 have the unique opportunity of having my attention exclusively for themselves for 5 days.
Hope they will utilise it to the maximum.
Those who could not make it, just relax....!
Best
HoD-ECE-SVIT
Today at 08:30AM the workshop started with 5/10 registered turning up.
It was extremely hot and I really congratulate the students who are sitting through the sessions.
Day 01 was mostly theoretical preparatory exercises and practicals will be more from Day 02.
If more students had turned up, the variety of discussions and opinions would have spiced up the atmosphere.
However, the current batch of 5 have the unique opportunity of having my attention exclusively for themselves for 5 days.
Hope they will utilise it to the maximum.
Those who could not make it, just relax....!
Best
HoD-ECE-SVIT
Wednesday, May 22, 2013
T2P Workshop Countdown - 01
Dear Students
Important instructions to remember :
The batch of 10 will be divided in to five batches.
The batches will be changing constantly and will be picked at random.
This workshop, is designed to inculcate design discipline.
You are expected to follow all rules and regulations failing which you will be advised to leave mid-way and join in another workshop.
If you follow the instructions and take help given, you will be able to complete the workshop without any difficulty.
You MUST complete the assignments given to you on a DAILY basis.
DAY ONE HAS SIX ACTIVITIES PLANNED FOR YOU.
08:30AM - 08:45AM : Registration and Introduction
08:45AM - 09:00AM : Activity - 01
09:00AM - 09:10AM : BREAK
09:10AM - 10:00AM : Activity - 02
10:00AM - 11:00AM : Activity - 03
11:00AM - 11:15AM : BREAK
11:15AM - 12:15PM : Activity - 04
12:15PM - 01:15PM : LUNCH BREAK
01:15PM - 03:15PM : Activity - 05
03:15PM - 03:30PM : BREAK
03:30PM - 04:00PM : Activity - 06
04:00PM - 04:20PM : Presentations and Review.
04:20PM - 04:30PM : Day 02 Introduction and Instructions
Good Wishes
HoD-ECE-SVIT
+91-9866358271
Tuesday, May 21, 2013
T2P Workshop Countdown - 02
What to get for the workshop
Dear Students,
When you come to the workshop please bring along with you the following tools :
TOOLS TO PURCHASE AND GET TO THE WORKSHOP :
(Contact me tomorrow for any clarifications)
RECORD :
Good Wishes
- Soldering iron (SOLDRON make)
- Soldering Iron Stand
- De soldering pump
- Solder remover wick (copper braid)
- Solder reel (22swg)
- Side cutters
- Wire Stripper
- Nose Plier (small pliers)
- Small flat-blade screw driver
- A crocodile clip to act as a heat sink
- Track cutter (a 3mm drill bit fit with a handle)
- PCB Rubber/Abrasive Rubber for cleaning PCBs
Components :
The components will be purchased from a convenient electronic store like SV Electronics at Secunderabad station (or Abids) in bulk for the entire batch on each day of the workshop. So, DO NOT purchase any components unless you are specifically told to buy..
Reference material :
You will be needing reference material for Electronic Design exercises and C-Programming exercises. Although we will provide the required inputs and help, you may bring along material that you think will be helpful. This you will know on the first day of the workshop.
Stationery:
1. Long note book
2. Log Book ( an old diary will do)
3. Pencil, pen
4. Eraser, sharpener
Dress :
THERE IS NO DRESS CODE.
FOOD :
You will not be allowed LONG breaks for Lunch or breaks beyond the stipulated time.
It will be better if you come with ALL food items for the whole day and avoid GOING far for LUNCH.
NO REFRESHMENTS WILL BE PROVIDED BY THE DEPARTMENT.
DISCIPLINE :
This WORKSHOP expects all participants to CREATE an atmosphere of DISCIPLINED DESIGN ACTIVITY. Therefore do not do anything that disturbs the PUNCTUALITY and SERIOUSNESS of the activity.
RECORD :
You will be encouraged to record through log book/photographs/video the activities for future reference.
It will help you rewind and give effective presentations at a later date.
The time-table for the week will be given tomorrow.
Good Wishes
HoD-ECE-SVIT
Monday, May 20, 2013
T2P Workshop Countdown - 03
Dear Students,
The workshop is a place (and time) when learning should be accidental and fun should be incidental !
It must create an atmosphere where every participant becomes part of the whole and yet looks deep inside his/her personality, makes a careful analysis of his/her skills and draws suitable and agreeable plans to fill those gaps.
There is individual effort , team work and fun and learning in that order.
The workshop is scheduled from 23rd May to 29th May , 2013.
DURING THE WORKSHOP :- FOLLOW RULES STRICTLY TO AVOID ELIMINATION.
During the workshop, you will be given small manageable tasks with instructions.
You must complete the tasks by reading the instructions on your own.
Help will be given but points will be deducted.
The participant who finishes the task RIGHT FIRST TIME - FIRST will get the maximum points.
There will be appropriate breaks between events and you will have time to speak to other participants.
Please bring enough food and refreshments and WATER that will keep you nourished throughout the day.
So much for TODAY.
I am still chiseling the dos and donts , list of essentials for the workshop.
Good Wishes
HoD-ECE-SVIT
The workshop is a place (and time) when learning should be accidental and fun should be incidental !
It must create an atmosphere where every participant becomes part of the whole and yet looks deep inside his/her personality, makes a careful analysis of his/her skills and draws suitable and agreeable plans to fill those gaps.
There is individual effort , team work and fun and learning in that order.
The workshop is scheduled from 23rd May to 29th May , 2013.
DURING THE WORKSHOP :- FOLLOW RULES STRICTLY TO AVOID ELIMINATION.
During the workshop, you will be given small manageable tasks with instructions.
You must complete the tasks by reading the instructions on your own.
Help will be given but points will be deducted.
The participant who finishes the task RIGHT FIRST TIME - FIRST will get the maximum points.
There will be appropriate breaks between events and you will have time to speak to other participants.
Please bring enough food and refreshments and WATER that will keep you nourished throughout the day.
So much for TODAY.
I am still chiseling the dos and donts , list of essentials for the workshop.
Good Wishes
HoD-ECE-SVIT
Sunday, May 19, 2013
T2P Workshop Countdown - 04
Dear Students,
There was NO POSTING YESTERDAY. Please note.
The primary objective of this workshop is to create an environment within the department that helps any student get the required skills easily without spending lots of money or running around external agencies.
The trick of making this a success is VERY SIMPLE. Specialisation.
Small teams must be developed that specialise in different areas of Electronic design. Any student of the department can approach this small team..either online or personally to get the required know-how.
You learn a skill, you form a team, you perfect the art and craft of that specific skill, and you are ready to IMPART that skill to whoever wants to learn.
During the workshop, we will take you through the formal steps of design and prototype development. We will basically look at YOUR ATTITUDE towards the field of Electronics. You will agree that attitude is very important for success. Once you have the right attitude, your success is only a matter of time...depending on your understanding, practice and perfection.
To make everyone understand the seriousness of this workshop, we have devised a few rules that help you decide whether you match the requirements or not.
Strict adherence to timings, written instructions is a MUST. You will risk elimination in case you do not follow them.
Please DO NOT BUY any tools or components. Wait for our instructions.
VERY IMPORTANT :
THIS WORKSHOP DOES NOT LOOK AT YOUR EAMCET RANK/CLASS RANK/ANY OTHER RANK. YOU WILL START FROM ZERO...UP !
Good Wishes
HoD-ECE-SVIT
Friday, May 17, 2013
T2P Workshop Countdown - 06
Dear Student,
The REGISTRATIONS for the T2P Workshop from 23-29 May, 2013 are now CLOSED.
Following is the list of students :
11P71A0408
|
C ANUSHA
|
11P71A0411
|
GUDA BHANU PRAKASH
|
11P71A0430
|
A N S KARTHIK
|
11P71A0473
|
ANNADANAM RUTWIK PRABHAT
|
11P71A0476
|
ADDAGATLA
SAMANTH KUMAR
|
11P71A0478
|
K SANJAY JI
|
11P71A0495
|
NALLA SOWMYA
|
11P71A04A4
|
VELAGALA VANDANA
|
11P71A04B3
|
A R S SASHANK
|
12P78A0401
|
K. LAKSHMAN
|
Thank you for the response and inclination to do a project in the ECE department during your vacation period.On 22nd May, 2013 I will send you a mail based on which you will be coming to the department.The workshop will be from 23rd May 2013 to 29th May 2013.
You will have to abide by the rules and regulations that will be put in place exclusively for the project work.
The component costs and tool costs will have to be borne or shared exclusively by you.You will be given guidance and help which will be sufficient to execute the projects. You will have supervisors who will monitor your work and take care of your needs.Your aptitude and attitude towards a disciplined design approach will be monitored closely.
A certificate will be given to you at the end only on successful completion of all projects.
Attendance to all classes is compulsory.Please wait for the detailed schedule before coming to college.
If you wish to drop out, due to personal engagements, this is the time.Good Wishes and thanks for your interest in Electronic Design.
For further details on a day to day basis please visit http://11ecesvit.blogspot.in
HoD-ECE-SVIT
Thursday, May 16, 2013
T2P Workshop Countdown -07
Dear Students
Registration for the work shop closes at 9:00PM TODAY (17-05-2013).
Those who have got mail from me confirming the registration are requested to watch this space on a daily basis to become familiar with what to expect from the week long workshop starting from 23rd May, 2013.
Concentrate on your exams and write them well.
When the work shop begins, concentrate on the work shop and do it well.
When the vacation begins, concentrate on the vacation and enjoy it well.
When the preparations for the next semester are announced, understand the purpose of these preparations and make full use of them so that you can enjoy the next semester and also gain maximum benefit from it academically.
More tomorrow....
Best
HoD-ECE-SVIT
Registration for the work shop closes at 9:00PM TODAY (17-05-2013).
Those who have got mail from me confirming the registration are requested to watch this space on a daily basis to become familiar with what to expect from the week long workshop starting from 23rd May, 2013.
Concentrate on your exams and write them well.
When the work shop begins, concentrate on the work shop and do it well.
When the vacation begins, concentrate on the vacation and enjoy it well.
When the preparations for the next semester are announced, understand the purpose of these preparations and make full use of them so that you can enjoy the next semester and also gain maximum benefit from it academically.
More tomorrow....
Best
HoD-ECE-SVIT
Tuesday, May 14, 2013
T2P Workshop from 23-29 May , 2013
Dear Student,
I will be conducting a week long workshop for 2011 Batch from 23rd to 29th of this month.
1. The number of students is LIMITED to 20.
2. Entry is on first come first served basis.
3. LAST DATE FOR REGISTRATION IS 17-05-2013 before 9:00 PM
4. To register, mail me hodece@live.com with your details as soon as possible.
5. There is NO ADMISSION FEE for the workshop.
6. Cost of material must be borne by the students only.
7. If you are interested in participating, you must strictly follow the rules and regulations laid out for the period.
All details will be provided once the final list is prepared.
Please note:
You risk elimination from the workshop if you do not follow the rules strictly.
I will communicate through email with only those students who have registered for the workshop.
Best
HoD-ECE-SVIT
Saturday, May 4, 2013
Friday, May 3, 2013
Good response to pre-final exam
Dear students,
You did well by coming to write the pre-final exam today.
I was happy to see that a majority of you received the change in timings correctly through blog/mail.
I too did my bit by preparing two question papers - one for students who missed the change notice and the other for those who did not.
When you write exams like this, we can help you improve your presentation skills and technical skills.
Trust me..
HoD-ECE-SVIT
You did well by coming to write the pre-final exam today.
I was happy to see that a majority of you received the change in timings correctly through blog/mail.
I too did my bit by preparing two question papers - one for students who missed the change notice and the other for those who did not.
When you write exams like this, we can help you improve your presentation skills and technical skills.
Trust me..
HoD-ECE-SVIT
Thursday, May 2, 2013
Change of timings of pre-final ECA exam -reg
Dear Students
Please note :
I am conducting the ECA exam from 12:00 noon to 03:00pm due to the following reasons :
1. The college will issue hall tickets from afternoon and you can collect them before leaving.
2. We will have the certificate distribution ceremony for the top 10 students from 04:00pm which all of you must attend and make it a success.
Best
HoD-ECE-SVIT
Please note :
I am conducting the ECA exam from 12:00 noon to 03:00pm due to the following reasons :
1. The college will issue hall tickets from afternoon and you can collect them before leaving.
2. We will have the certificate distribution ceremony for the top 10 students from 04:00pm which all of you must attend and make it a success.
Best
HoD-ECE-SVIT
Wednesday, May 1, 2013
If a paper like this is leaked for tomorrow's exam - How will your write it ?
Electronic
Circuit Analysis
Practise Questions for
Tomorrow’s theory exam
(Incomplete)
Date
: 02-05-2013
1
|
a. It is desired to have a high-gain amplifier
with high input resistance and high output resistance. If a three stage
cascade is used, what configuration should be used for each stage ? Explain.
b.Sketch
the circuit diagram of a cascode amplifier. How do the Av and Ai of this
circuit compare to corresponding values for a common-emitter stage ?
|
|
1
|
Draw the cascade of a common-emitter stage and a common-collector
stage. What are the overall voltage gain, input resistance , and output
resistance of the cascade ?
|
|
1
|
a. For
a capacitively coupled load, is the dc load larger or smaller than the ac
load ?
b. Show
the effect of the capacitively coupled load in terms of the static and
dynamic load lines.
|
|
2
|
a. How
does step-response help in finding the bandwidth of an amplifier ? Explain.
b. Sketch
the frequency response of a single-pole transfer function.
c. Define
fβ and fT and write an equation
which relates the two.
|
|
2
|
a. For
a common-emitter stage , use Miller’s theorem to determine the input
capacitance of a common-emitter stage.
b. How
do coupling and bypass capacitors effect the frequency response of an
amplifier stage ?
|
|
2
|
a. Why
does cascading of stages increase the gain-bandwidth product of an amplifier
?
b. Discuss
the advantages of cascode amplifier.
|
|
3
|
a. Write
the transfer function of an amplifier having three-poles and two finite
zeros.
b. Write
the equations that relate h-parameters to hybrid-π parameters. Show how, at
low frequencies the hybrid-π parameters reduce to h-parameters.
|
|
3
|
a. Draw
the circuit of a single stage RC coupled amplifer and derive the expressions
for the lower cutoff and upper cutoff frequencies .
b. Repeat
(a) with FET amplifer.
|
|
5
|
a. Prove
that negative feedback reduces non-linear distortion.
b. Discuss
the properties of feedback amplifier topologies.
|
|
5
|
a. List
five characteristics of an amplifier that are modified by negative feedback.
b. To
obtain the amplifier without feedback, describe how to obtain the (i) input
circuit and (ii) output circuit
|
|
5
|
a. What
is the difference between global and local feedback ? Show with a circuit.
b. State
the three fundamental assumptions used in the approximate method of analysis
of negative feedback amplifiers.
c. For
each of the four topologies, indicate whether the (i) input impedance and (i)
output impedance increases or decreases as a result of feedback.
|
|
6
|
a. State
the Barkhausen criterion, that is, the conditions necessary for sinusoidal
oscillations to be sustained.
b. What
are the gain margin and phase margin needed to sustained sinusoidal
oscillations ?
c. Sketch
the phase-shift oscillator using a JFET.
|
|
6
|
a. Sketch
the topology for a generalised resonant-circuit oscillator, using impedances
Z1, Z2 and Z3. At what frequency will
the circuit oscillate ? Under what conditions does the configuration reduce
to a Colpitts oscillator ? A Hartley oscillator ?
b. Sketch
the circuit of a Wien bridge oscillator.
Which components determine the frequency of oscillation ? Which
components determine the amplitude of oscillation ?
|
|
6
|
a. Draw
the electrical model of a
piezoelectric crystal. Sketch the reactance versus frequency. Over what
portion of the reactance curve do we desire oscillations to take place when
the crystal is used as part of a sinusoidal oscillator ? Explain.
b. Sketch
a circuit of a crystal-controlled oscillator.
|
|
7
|
a. Derive
an expression for the output power of a class A large-signal amplifier in
terms of Vmax, Vmin, Imax and Imin
b. Discuss
how rectification may take place in a power amplifier.
c. Define
intermodulation distortion and total harmonic distortion.
|
|
7
|
a. Define
(i) class A (ii) class B and (iii)
class AB amplifier
b. Define
conversion efficiency η of a power stage.
c. Draw
the circuit of a class B push-pull power amplifier and state three advantages
of class B over class A.
|
|
7
|
a. Show
that the maximum conversion efficiency of the idealised class B
push-pull circuit is 78.5 pc.
b. Demonstrate
that even harmonics are eliminated in a balanced push-pull amplifier.
|
|
7
|
a. Explain
the origin of crossover distortion. Describe a method to minimise this
distortion.
b. Define
thermal resistance θ. Sketch a dissipation derating curve for power
amplifier. How is θ related to this curve ?
c. What
is a heat sink ? Explain why a heat sink must be used with a power amplifier.
|
|
8
|
a. A
parallel RLC circuit is resonant at 2.7kHz. The circuit has L = 0.15H
inductance, C = 0.232µF,
and parallel resistance of 30,000
ohms.
I.
What is the circuit impedance at resonance ?
II.
What is the circuit Q ?
III.
What is the bandwidth ?
IV.
What is the circuit impedance at the upper
band limit ?
|
|
8
|
a. A
parallel-resonant circuit is resonant at 10MHz, Q = 120, and the resistances
are each 750 ohms. What is the value of Rp and of an equivalent Rs in series
with L which might replace Rp ?
b. A
double tuned circuit k = 2kc and Q1 = Q2 = 80. If f0 = 10.7MHz what are the
frequencies of peak response ? What is the 3-dB bandwidth of the circuit ,
with ripple of 3dB ?
|
Subscribe to:
Posts (Atom)
